DHL shipping+96 Channel fireworks firing system+300M Remote+2400cues transmitt
We have more item, if you need pls contact with us, we will show you website! Frequency according to your Country requirement!!
Ew arrival: It could adjust sequential time by yourself. The time range is from 0.1 S to 9.9 S. Please find the pictures below. The whole set is including one 24cues transmitter and 4 pcs 24 channels receivers. At most you can add 10pcs receivers. Less weight and longer life. Charging on AC for 8 hours. The remote distance is 300M. With 24 buttons and 24 LED. When the, the LED will turns RED. With "r" button, it is divided into parts, "1-12" and "13-24" to do the. It could divide into 10 d.
Control 10pcs 24 channels receivers at max. Please notice the "d" button on the top right corner. When you adjust it to "1", it will control the first 24 channels of first receiver (d). When you adjust it to "2", it will run the second receiver (district). Powered by 12V internal rechargeable, less weight and longer life.
The LED will turns RED when receiving the signal successfully. With 24 clips and 24 LED for TEST. It could divide into 10 d (control 10pcs 24 channels receivers at max). When you adjust it to "1", it will control the first 48 channels of first receiver (d). When you adjust it to "2", it will run the second receiver (d). Please charging the transmitter and receivers on AC for 8 hours. TEST- Please turns on power switch of transmitter. Move the s switch to test position. And then connect products into red&black plug. Then press the button one by one. It indicates the products are connected well if the test lamps on receiver get red one by one.
Program the transmitter and receiver. If you want the transmitter to run one receiver at one time. Please adjust transmitter to "1", and then adjust receiver to "1", too. In such a case, you can operate the transmitter with the "1" transmitter.
If you want transmitter to run two receivers at one time. Please adjust transmitter to "1", and then adjust two receivers to "1", too. In such a case, if you press Button"1", the channel "1" on both receivers will. Press button"2", then channel "2" on both receivers will If you want to do the, please press. (You could decide interval time for sequential) You could use the transmitter to control many receivers to together by this way.
Now when the first receiver done, the second will start, and then the receivers will one by one. You'd better cut off the power of machine when charging on AC.
There are two LED on the charge(red LED and green LED), both will light when charging. The green LED will when the electricity is full. Only the red one is light. The charging time is about 8 hours.
And the will keep for 5-10 hours. 1 Please do not shake incept box violently. When no need use it. When you connect the product well, do not touch the clip of the in order to not the because of the. 3 Please take the cell out when no use products, for prevent defile incept box. 4 Please do not place the product in the damp, sour, alkali and pollution environment. 5 The remote by the rolling controlled number, with this remote, the receive will not be controlled by other remote in 1 million, but also maybe appear, when connecting the make sure your body far away the exit of the after connecting, far away the and take care yourself. Your product can be delivered in 3-7 days.
